first thing..scrape box testing is rather slow
to increase this change these options
open scrapebox ini file edit the following
for faster leeching and testing
this will increase the speed it leeches
and will test proxies alot faster..
time out default is 30 seconds
imagine testing say 10k proxies
where 7k are timed out - that means
7000 proxies each being re-tested for 30
seconds each. advise set it lower alot lower
TimeOut= use between 3-5. to lessen test time.
this next part only effects using socks proxies only
now if u use the internal leech option u will see if u
saved any proxies back to the main window after testing
all the socks back in the main windows list will look like this
when u import your leeched and tested proxies back to
the main window all socks will have a capital S at the start
of each port number.
why is this important - because if you take a list of socks say
from a post u might find and just load them into your main programe
window to run without testing they will look like this and will not work
the point being leeched lists checked and tested and sent back to
the main window carry the capital S... a socks list loaded into the
main programme window without testing and try to use, all socks
as of now proxiecentral now has a new scrape box category
for all VIP members.. hope these tips help...
sample of my own proxies i test in scrape box tonight..
all the lists posted in my forum are mixed lists of
socks and anon proxies, so to get the socks in
the list to work u must re-test the whole list then
send it back to main windows or the socks will fail
if you try loading them directly into the main window
then only the anon proxies will work as the capital S
will be gone.
socks that are tested from the internal leecher
then sent back to the main programme so use
have the S at the start of each sock. it tells
the programme there is usuable socks in the list.
ok so here was have a few socks collected from
the leecher i removed all anon proxies to make the
point socks tested , dead removed
now when the socks proxies are sent back to the
main programme look at how the programme shows
them listed. each sock has the letter S at the start
of each port - this format means they will run.
see pic below.
if how ever u deciede to grab a list of socks
from a post somewhere and not test them but
just throw them in the main window to use
you will see the capital S is gone and any attempt
to run them will fail see pic
put simple if u have a list of socks or a list of
anon proxies/socks never just throw them in the
main window to use as all socks will fail..
send any imported liste to the proxy checker
then after u have tested them
send them back to the main window so
that the programme applys ths S to the socks
in the list.. understand? other wise your loosing
the ability run using socks and only anon will work
from the sent back list
finaly which file to edit the settings for faster
leeching and testing - the one marked in blue
proxie leecher speed increase 225%
proxie tester test increases by 28 seconds per proxie
if u have no idea about editing only change t***s 3
final test was to inport 20k mixed proxies anon
socks thrown in the tester..20k on default settings
would take about 2hrs.. with new text edited settings
list loaded leached from 669 sources .
note - while loading a list that large dont touch the
mouse - or the programme will fail to respond and crash.
loaded ammount = 20k
time taken = 29mins
working = 660
this was without me adding my socks into the test list