Can't check by AZenv - ProxyFire

emogu · 10-05-2012, 15:43

Hello!I'm Jason.At My Office I Use The Proxyfire To Check Proxy By AZenv Are All The L1,L2 Proxy,Don't Have L3.But check by judge V2.35 is OK.At My home AZenv & Judge Are All OK.I Don't Know Why?Can You Help Me?Thx!!

**vivalabob** · 12-05-2012, 18:24

Maybe it's the IP address that's showing in Proxyfire isn't the same as the computer is using. That would make every proxy look annoymous even if the proxy is showing the real IP it's different than the one it's checking against. So the program wouldn't know the difference. I've had it happen with dynamic IPs if it changes while the program is still open Proxyfire will keep the old IP until you go change it in settings. Try hitting the decect IP button before checking and see if that helps.

12-05-2012, 18:24	#2
vivalabob VIP MEMBER Join Date: Jun 2007 Posts: 1,163 Credits: 16,539.12 Rep Power: 17	Maybe it's the IP address that's showing in Proxyfire isn't the same as the computer is using. That would make every proxy look annoymous even if the proxy is showing the real IP it's different than the one it's checking against. So the program wouldn't know the difference. I've had it happen with dynamic IPs if it changes while the program is still open Proxyfire will keep the old IP until you go change it in settings. Try hitting the decect IP button before checking and see if that helps. __________________ All Proxies Checked and Filtered by ProxyFire 1.24 Timeouts 10 Connect 15 Recv

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

» Important News: ProxyFire.net is going to be upgrading «